Agilent Technologies 75000 B Series Service Manual page 63

if (tree[i][j] > 3100)
{
if (j == 0) printf ("\n*** Resistance for A Tree Switch is 3.1 kOhms");
else printf ("\n*** Resistance for B Tree Switch is 3.1 kOhms");
}
}
if (i == 0)
{
printf ("\n\nMeasurements complete for Tree Switch HI");
printf ("\nPress ENTER forTree Switch LO measurements");
getchar();
}
else
{
printf ("\n\nMeasurements complete for Tree Switch LO");
}
}
printf ("\n\nClosed channel resistance measurements complete.");
printf ("\nPress ENTER to display measurement results.");
getchar ();
/*...........................Display Measurement Results................................*/
printf ("\n\n---------------------------------------------");
printf ("\n\nClosed Channel Resistance measurement Results\n");
for (j = 0;j <= 15; j++)
{
printf ("\n Channel %u HI = %6.4lf Ohms LO = %6.4lf Ohms", j+100,
result[0][j], result[1][j]);
}
printf ("\n\n Tree A HI = %6.4lf Ohms LO = %6.4lf Ohms", tree[0][0],
tree[1][0]);
printf ("\n Tree B HI = %6.4lf Ohms LO = %6.4lf Ohms", tree[0][1], tree[1][1]);
EXIT:
iclose (id);iclose (dm);
}
/* Close instrument session */
Example C Programs A-5