Remote Control And Functions - Rinnai Pro Series Operation Manual

Remote control and functions

ON/OFF
Turns the unit on or off.
TEMP
Increase temp. in 1 °C
increments. Max. temp.
is 30 °C. If you press the
up and down buttons
at the same time for 3
secs. the temp. display
will alternate between °C
and °F.
TEMP
Decrease temp. in 1 °C
increments. Min. temp. is
16 °C.
SET
Scrolls through
functions as follows:
Sleep > Follow Me
> Wireless control >
Sleep. The selected
symbol will flash in the
display, press OK to
confirm.
FAN SPEED
Selects fan speed in
the following order:
AU > 20% > 40% >
60% > 80% > 100%.
Press the TEMP up
or down button to
increase/decrease
the fan speed in 1%
increments.
SWING
Starts and stops the
horizontal louvre. Hold
down for 2 seconds
to initiate the vertical
louvre auto swing
feature.
8 |
Lock function
Press Clean and Turbo together for more than 5 seconds
to activate the lock function. A lock symbol will appear. All
buttons will be disabled. To disable press both buttons again
for 2 seconds.
MODE
Scrolls through the
operation modes as
follows:
AUTO > COOL > DRY
> HEAT > FAN
ECO/GEAR
Press this button to
enter energy efficient
mode, sequence as
follows:
ECO > GEAR (75%) >
GEAR (50%) > ECO
OK
Used to confirm the
selected functions.
TIMER
Set the timer to turn the
unit on or off.
BREEZE AWAY
Reduces the fan speed
and raises louvre.
CLEAN
Used to start/stop the
self clean or active
clean function.
LED
Turns LED display on
and off.
TURBO
Enables the unit to
reach the preset
temperature in the
shortest possible time.