Manual Operation Without Remote - Rinnai Pro Series Operation Manual

Manual operation without remote

The manual button is intended for testing purposes and emergency operation only. Please do not
use this function unless the remote control is lost and it is absolutely necessary.
You will need a long thin tool to activate the manual control button as it is positioned underneath
the electrical panel.
DO NOT undo the screw holding the control panel in place as this will expose live electrical
connections. This must only be done by an authorised tradesperson.
WARNING
To operate your unit manually:
1. Open the front panel of the indoor unit.
2. Locate the manual control button on the right-hand side of the unit.
3. Press the manual control button one more time to activate 'forced auto' mode.
4. Press the manual control button again to activate 'forced cooling' mode.
5. Press the manual control button a third time to turn the unit off.
6. Close the front panel.
12 |
Manual control button
You will need a long thin tool to access as it is
positioned underneath the control panel.
In forced auto mode the unit operates with a
set temperature of (24 °C).