Setting The Angle Of Air Flow - Rinnai Pro Series Operation Manual

High wall split heat pump / air conditioner

Hide thumbs Also See for Pro Series:

Table of Contents

Setting the angle of air flow

While the unit is on, use the SWING button on the remote control to set the direction of air flow,

refer p.11.

Note on louvre angles

When using COOL or DRY mode, do not set the louvre at too much of vertical angle for long

periods. This can cause water to condense on the louvre blade which will drop on your floor or

furnishings.

When using COOL or HEAT mode, setting the louvre at too vertical an angle can reduce the

performance of the unit due to restricted air flow.

Do not move the louvre by hand. This will cause the louvre to become out of sync. If this occurs,

turn off the unit and unplug it for a few seconds, then restart the unit. This will reset everything.

| 13

Table of Contents