Advertisement
2. PANEL / REMOTE LOCK Selection Mode
2.1. Actions
Switch the PANEL LOCK and REMOTE LOCK modes between on and off.
2.2. Starting up
While holding down buttons "STATUS" and "INFO" simultaneously, press the power button to turn on
the power.
Select the desired mode using the "CURSOR f / d " button, then press the "ENTER" button to confirm.
2.3. Displaying and Selecting Each Mode
The information shown on the display switches each time the "CURSOR f / d " button is pressed.
Press the "ENTER" button to set the currently displayed mode and restart the device.
The setting with " * " is selected for each mode.
q
L1
–FP/VOL LOCK*On
L2
FP LOCK
On
The buttons on the unit and the master volume knob does not function.
w
L1
FP/VOL LOCK*On
L2
–FP LOCK
On
The buttons on the unit does not function.
e
L1
FP LOCK
On
L2
–FP LOCK
Off
The PANEL LOCK mode is turned off.
r
L1
FP LOCK
Off
L2
–RC LOCK
On
The device cannot be operated by the remote control.
t
L1
RC LOCK
On
L2
–RC LOCK
*Off
The REMOTE LOCK mode is turned off.
147
Advertisement
