Advertisement
When the results of check item (3-18.1.) are "YES"
(When the menu display is OK)
HDMI
Turn Video Conversion "ON" on the setup menu.
(SETUP MENU-> Video-> Output Settings-> Video Conversion = On)
In order to check, connect the player to the HDMI terminal and configure the player as AVR source.
Next, turn on the power for the player and TV and start playback on the player.
Check the Video signal line. (HDMI Tx -> PLD)
IN1
HDMI OUT
Check item(3-18.5.).
Check the PLD video signal line from the HDMI
Tx :
Check the video signal waveform at the following test point.
Is the waveform like the sample?
U3401
TP
YES
Check the peripheral pattern between the HDMI Tx [U3401] and PLD [U3200].
If there is no problem, the HDMI Tx [U3401] is faulty.
Replace with a new device.
Recheck from
check item (3.5.)
If it does not work, replace the PCB.
Check the Video signal line. (PLD -> GUI)
Check item(3-18.6.).
Check the GUI video signal line from the PLD :
Check the video signal waveform at the following test point.
Is the waveform like the sample?
TP
U2800
YES
GUI [U2800] is faulty.
Replace with a new device.
Recheck from
check item (3.5.)
If it does not work, replace the PCB.
140
3.3V
Example of waveform in check ①
Voltage scale : 1.0V/div
Time scale : 1ms/div
3.3V
Example of waveform in check ②
Voltage scale : 1.0V/div
Time scale : 1us/div
NO
3.3V
Example of waveform in check ①
Voltage scale : 1.0V/div
Time scale : 1ms/div
3.3V
Example of waveform in check ②
Voltage scale : 1.0V/div
Time scale : 1us/div
NO
Check the peripheral pattern between the PLD
[U3200] and GUI [U2800].
If there is no problem, the PLD [U3200] is faulty.
Replace with a new device.
Advertisement
