Advertisement
1. Version Display Mode
1.1. Actions
Version information is displayed when the device is started in this mode.
1.2. Starting up
While holding down buttons "SETUP" and "OPTION" simultaneously, press the power button to turn
on the power.
then press the "STATUS" button to display the information in section 1.3 on the display.
b The version list is also displayed on GUI while the version is displayed on the display.
1.3. Display Order
Error information(See
"1.4. Error
display") → q Model destination information, Serial Number
→ w Firmware Package → e Main μ -com, Main 1st Boot Loader → r DSP1/2/3/4 ROM
→ t Audio Video PLD → y GUI SFLASH → u HEOS Version → i HEOS Build → o HEOS Module
→ Q0 HEOS Configuration → Q1 HEOS Locale → Q2 Restore Version → Q3 Ether Mac Address
→ Q4 WiFi Mac Address → Q5 BT Mac Address → Q6 Audyssey App Interface Version
q Model destination information, Serial Number：
L1
@@@-X6500H \\\
L2
S/N.
**********
@ ： Model name (AVR, AVC)
\ ： Region (E3, E2,E1C, JP)
w Firmware Package :
L1
Firm. Package
L2
Ver.:****
e Main µ-com, Main 1st Boot Loader :
L1
M:*************
L2
Main FBL :**.**
r DSP 1/2/3/4 ROM :
L1
DSP1
:**.**
L2
DSP2
:**.**
L1
DSP3
:**.**
L2
DSP4
:**.**
t Audio, Video PLD :
L1
Audio PLD:**.**
L2
Video PLD:**.**
y GUI SFLASH :
L1
GUI
:@@$\****
@ : Model code
$ : Brand code (Non=0, De=1, Mz=2, Mc=3)
\ : Region code (E3=1, E2=2, E1C=5, JP=4, ALL=0)
* : version
u HEOS Version :
L1
HEOS Version
L2
*.***.***
i HEOS Build :
L1
HEOS Build
L2
******
o HEOS Module :
L1
HEOS Module
L2
***
Q0 HEOS Configuration :
L1
HEOS Config
L2
Development
Production
Q1 HEOS Locale :
L1
HEOS Locale
L2
*****
Q2 Restore Version :
L1
RSTR
L2
************
Q3 Ether Mac Address :
L1
*Ether MAC
L2
******-******
Q4 WiFi Mac Address :
L1
*Wi-Fi MAC
L2
******-******
Q5 BT Mac Address :
L1
*BT MAC Address
L2
******-******
Q6 Audyssey App Interface Version :
L1
Audy IFVer:**.**
L2
144
Advertisement
