Installing The Air Filter; Removing The Main Silencer - Husqvarna TE 150 2023 Owner's Manual

12 SERVICE WORK ON THE CHASSIS
12.24
12.25
70

Installing the air filter

H02459-01
V00907-10

Removing the main silencer

Warning
Danger of burns The exhaust system gets very hot when the vehicle is driven.
–
Allow the exhaust system to cool down before performing any work on the vehicle.
F02315-10
–
Clean the intake flange and check it for damage and tight-
ness.
Finishing work
–
Install the air filter. (
–
Install the air filter box cover. (
Main work
–
Mount the clean air filter on the air filter support.
–
Grease the air filter in area
Long-life grease ( p. 156)
–
Insert air filter and position retaining pin
The air filter is correctly positioned.
–
3
Insert retaining tab .
2
Retaining pin is secured with retaining tab
Info
If the air filter is not mounted correctly, dust and dirt
may enter the engine and result in damage.
Finishing work
–
Install the air filter box cover. (
–
1
Remove screws with the washers.
–
Pull off the main silencer with exhaust sleeve
spring ring from the manifold.
p. 70)
p. 68)
A
.
1
in bushing
3
p. 68)
2
and the
B
.
.