12.18
Removing the seat
12.19
Mounting the seat
SERVICE WORK ON THE CHASSIS 12
–
Attach frame protector in area
–
Mount and tighten screws
Guideline
Screw, frame pro-
tector
–
Mount the new cable ties.
S04908-11
Finishing work
–
Remove the motorcycle from the lift stand. (
Preparatory work
–
Remove the air filter box cover. (
Main work
–
Remove screw
F02310-10
–
Raise the rear of the seat, pull the seat back, and lift it off.
H02218-10
Main work
–
Mount the front of the seat on the collar bushing of the fuel
tank and the rear in the bracket.
–
Push the seat forward.
–
Make sure the seat is correctly latched in place.
H02218-11
C
and position it.
7
with the washers.
M5
3 Nm (2.2 lbf ft)
p. 68)
1
.
p. 55)
67