Table of Contents
Advertisement
18.4
Cleaning the oil screen in the oil tank
Note
Environmental hazard Hazardous substances cause environmental damage.
–
Dispose of oils, grease, filters, fuel, cleaning agents, brake fluid, etc., correctly and in compliance
with the applicable regulations.
SERVICE WORK ON THE ENGINE 18
–
Plug in wake-up connector
diagnostics connector
The combination instrument lighting is activated.
Info
The connector is included as part of the motorcycle's
separate enclosure.
–
Wait for at least five seconds.
–
Release the fixing means from the throttle grip.
The oil pump is timed.
Info
The oil pump is actuated at various speeds.
The procedure is clearly audible.
–
Wait until you can no longer hear the oil pump operating.
–
Disconnect the wake-up connector from the diagnostics con-
nector.
S04854-10
–
Check whether air bubbles are visible in the hose
»
If air bubbles are visible:
–
Repeat the entire procedure until air bubbles are no
longer visible.
–
Mount protection cap on the diagnostics connector.
–
Mount the EFI control unit on the rubber lugs.
F02321-10
Finishing work
–
Mount the seat. (
–
Install the air filter box cover. (
Preparatory work
–
Remove main silencer. (
–
Remove the air filter box cover. (
–
Remove the seat. (
–
Remove the right side cover. (
–
Remove the fuel tank.
–
Raise the motorcycle with a lift stand. (
5
for priming the oil pump to the
6
.
p. 67)
p. 68)
p. 70)
p. 68)
p. 67)
p. 72)
(
p. 73)
p. 55)
7
.
131
Advertisement
Table of Contents
