Line Card Cable-Management Bracket - Cisco XR 12000 Series Installation Manual

Figure 29
Verify that the SFP modules are completely seated and secured in their assigned receptacles on the line
Note
card by firmly pushing on each SFP module. If the SFP module was not completely seated and secured
in the receptacle, you will hear a click as the triangular pin on the bottom of the SFP module snaps into
the hole in the receptacle.

Line Card Cable-Management Bracket

The illustrations in this section show various line cards, but the line card cable-management bracket
Note
installation procedure is the same regardless of the specific line card.
Cisco XR 12000 Series Routers include a cable-management system that organizes the interface cables
entering and exiting the router, keeping them out of the way and free of sharp bends.
Excessive bending of interface cables can damage the cables.
Caution
OL-7861-01
Installing a Slide Tab SFP Module
2
3
4 O C
4 8 / S
R P - S
F P
Cisco XR 12000 Series Router Ethernet Line Card Installation
Line Card Cable-Management Bracket
37