Sharp MX-C507P User Manual page 37

Understanding the printer menus
Menu item
E‑mail Alerts Setup
E‑mail Setup
User‑Initiated E‑mail
None*
Use Device SMTP Credentials
Use Session User ID and Password
Use Session E‑mail address and
Password
Prompt user
E‑mail Alerts Setup
E‑mail Setup
Use Active Directory Device Credentials
Off*
On
E‑mail Alerts Setup
E‑mail Setup
Device Userid
E‑mail Alerts Setup
E‑mail Setup
Device Password
E‑mail Alerts Setup
E‑mail Setup
Kerberos 5 REALM
E‑mail Alerts Setup
E‑mail Setup
NTLM Domain
E‑mail Alerts Setup
E‑mail Setup
Disable "SMTP server not set up" error
Off*
On
Error Prevention
Jam Assist
Off
On*
Error Prevention
Auto Continue
Off
On* (5 seconds)
Note: An asterisk (*) next to a value indicates the factory default setting.
Description
Set whether credentials are required for user‑initiated e‑mails.
Enable user credentials and group designations to connect to
the SMTP server.
Specify the user ID to connect to the SMTP server.
Specify the password to connect to the SMTP server.
Specify the realm for the Kerberos 5 authentication protocol.
Specify the domain name for the NTLM security protocol.
Disable an SMTP setup error message to appear on the
display.
Set the printer to check for jammed paper automatically.
Let the printer continue processing or printing a job
automatically after clearing certain attendance conditions.
37