Honeywell N86 Series User Manual page 94

that supports concatenation of neighboring symbols, and 4) the standard
layout for bar codes on a blood product label. Use the bar codes below to
turn concatenation on or off. Default =Off.
Code 128 Message Length
Scan the bar codes below to change the message length. Refer to
Message Length Description
mum and Maximum lengths = 0-90. Minimum Default = 0, Maximum
Default = 90.
Minimum Message Length
Code 128 Append
This function allows the engine to append the data from several Code 128
bar codes together before transmitting them to the host computer. When
this function is enabled, the engine stores those Code 128 bar codes that
start with a space (excluding the start and stop symbols), and does not
immediately transmit the data. The engine stores the data in the order in
which the bar codes are read, deleting the first space from each. The
engine transmits the appended data when it reads a Code 128 bar code
that starts with a character other than a space. Default = Off.
6 - 20
On
On
(page 6-2) for additional information. Mini-
* Off
Maximum Message Length
* Off