Table of Contents
Advertisement
2a. If using hi-speed USB, connect the USB interface cable to the side of
the engine and to the USB port on the computer.
Note: For additional USB programming and technical information, refer to
Honeywell's "USB Application Note," available at
www.honeywellaidc.com.
3.
When connecting the engine using full-speed or high-speed USB, all
communication parameters between the engine and terminal must
match for correct data transfer using USB protocol. Scan the
appropriate USB interface bar code below.
Full-Speed USB
4.
Verify the engine operation by scanning a bar code from the
Symbols
bar code is successfully decoded.
1 - 4
in the back of this manual. The engine beeps once when a
High-Speed USB
Sample
Advertisement
Table of Contents
