Terminal Id Table; Data Format Editor Commands - Honeywell N86 Series User Manual

Discard to exit without saving any data format changes.
Clear One Data Format
Save

Terminal ID Table

Interface
RS232
USB

Data Format Editor Commands

Send Commands
Send all characters
F1 Include in the output message all of the characters from the input
message, starting from current cursor position, followed by an insert
character. Syntax = F1xx where xx stands for the insert character's hex
value for its ASCII code.
Refer to the
decimal, hex and character codes.
Send a number of characters
F2 Include in the output message a number of characters followed by an
insert character. Start from the current cursor position and continue for
"nn" characters or through the last character in the input message,
followed by character "xx." Syntax = F2nnxx where nn stands for the
numeric value (00-99) for the number of characters, and xx stands for
the insert character's hex value for its ASCII code.
Refer to the
decimal, hex and character codes.
5 - 4
Description
TTL
COM Port Emulation
PC Keyboard
ASCII Conversion Chart (Code Page
ASCII Conversion Chart (Code Page
Clear All Data Formats
Discard
Terminal
000
130
124
1252), page A-4 for
1252), page A-4 for
ID