Graco E Series Operation page 29

7.
Check fluid pressure display and adjust as nec-
essary, page 27.
8.
Check fluid pressure gauges (GA, GB) to ensure
proper pressure balance. If imbalanced, see
repair manual.
9.
Open gun fluid manifold valves A and B.
309551C
GA
GB
TI2482A
TI2414A
10.
Disengage gun piston safety lock.
11.
Test spray onto cardboard for several seconds,
to allow Reactor to adjust motor speed as
required for gun mix chamber nozzle. Adjust
pressure and temperature to get desired results.
12.
Equipment is ready to spray.
Spraying
TI2410A
29