Enabling And Disabling 802.11 Bands - Cisco OL-8335-02 Configuration Manual

Enabling and Disabling 802.11 Bands

Table 4-1
of country codes supported per product, refer to
http://www.cisco.com/warp/public/779/smbiz/wireless/approvals.html.
Table 4-1
Country Code
US
USL
AU
AT
BE
CA
DK
FI
FR
DE
GR
IE
IN
IT
JP
KR
LU
NL
PT
ES
SE
GB
Enabling and Disabling 802.11 Bands
You can enable or disable the 802.11b/g (2.4-GHz) and the 802.11a (5-GHz) bands for the controller to
comply with the regulatory requirements in your country. By default, both 802.11b/g and 802.11a are
enabled.
On the CLI, enter config 80211b disable network to disable 802.11b/g operation on the controller.
Enter config 80211b enable network to re-enable 802.11b/g operation.
Cisco Wireless LAN Controller Configuration Guide
4-6
lists commonly used country codes and the 802.11 bands that they allow. For a complete list
Commonly Used Country Codes
Country
United States of America
US Low
Australia
Austria
Belgium
Canada
Denmark
Finland
France
Germany
Greece
Ireland
India
Italy
Japan
Republic of Korea
Luxembourg
Netherlands
Portugal
Spain
Sweden
United Kingdom
Chapter 4
www.ciscofax.com or
802.11 Bands Allowed
802.11b, 802.11g, and 802.11a low, medium,
and high bands
802.11b, 802.11g, and 802.11a low and
medium bands (used for legacy 802.11a
interface cards that do not support 802.11a
high band)
802.11b, 802.11g, and 802.11a
802.11b, 802.11g, and 802.11a
802.11b, 802.11g, and 802.11a
802.11b and 802.11g
802.11b, 802.11g, and 802.11a
802.11b, 802.11g, and 802.11a
802.11b, 802.11g, and 802.11a
802.11b, 802.11g, and 802.11a
802.11b and 802.11g
802.11b, 802.11g, and 802.11a
802.11b and 802.11a
802.11b, 802.11g, and 802.11a
802.11b, 802.11g, and 802.11a
802.11b, 802.11g, and 802.11a
802.11b, 802.11g, and 802.11a
802.11b, 802.11g, and 802.11a
802.11b, 802.11g, and 802.11a
802.11b, 802.11g, and 802.11a
802.11b, 802.11g, and 802.11a
802.11b, 802.11g, and 802.11a
Configuring Controller Settings
OL-8335-02