Cisco 2000 Series Wireless Lan Controllers; Cisco 4100 Series Wireless Lan Controllers - Cisco OL-8335-02 Configuration Manual

Wireless lan controller
Table of Contents

Advertisement

Wireless LAN Controller Platforms

Cisco 2000 Series Wireless LAN Controllers

Cisco 2000 Series Wireless LAN Controllers can communicate with the network through any one of its
physical data ports, as the logical management interface can be assigned to one of the ports. The physical
port description follows:
Figure 1-5
Figure 1-5

Cisco 4100 Series Wireless LAN Controllers

Cisco 4100 Series Wireless LAN Controllers can communicate with the network through one or two
physical data ports, as the logical management interface can be assigned to one or both ports. The
physical port description follows:
The 1000BASE-SX circuits provide 100/1000 Mbps wired connections to the network through 850nM
Note
(SX) fiber-optic links using LC physical connectors.
1-22
Up to four 10/100BASE-T cables can plug into the four back-panel data ports on the Cisco 2000
Series Wireless LAN Controller chassis.
shows connections to the 2000 series controller.
Physical Network Connections to the 2000 Series Controller
Two Gigabit Ethernet 1000BASE-SX fiber-optic cables can plug into the LC connectors on the front
of the Cisco 4100 Series Wireless LAN Controller, and they must be connected to the same subnet.
Note that the two Gigabit Ethernet ports are redundant--the first port that becomes active is the
master, and the second port becomes the backup port. If the first connection fails, the standby
connection becomes the master, and the failed connection becomes the backup port.
Chapter 1
Cisco Wireless LAN Controller Configuration Guide
Overview
OL-8335-02

Hide quick links:

Advertisement

Table of Contents
loading

Table of Contents