Using Lightweight Access Point Leds - Cisco OL-8335-02 Configuration Manual

Using Lightweight Access Point LEDs

Using Lightweight Access Point LEDs
This table describes the meaning of LED patterns on lightweight access points.
Table D-4
LED Conditions
Power
Green on
Green on
Green on
off
All LEDs cycle back and forth
All LEDs blink on and off together
off
Cisco Wireless LAN Controller Configuration Guide
D-6
Cisco 1000 Series Lightweight Access Point LED Conditions and Status
Alarm 2.4 GHz
off on or off
off Yellow on
off on or off
Red on off
Red flashing off
Appendix D System Messages and Access Point LED Patterns
Status
5 GHz
on or off Controller found, code OK, normal status.
on or off 802.11b/g activity.
Amber on 802.11a activity.
off Lightweight access point starting up.
Lightweight access point searching for
controller. Stops when controller and
DHCP server are found.
Controller found, code upgrade in process.
off Duplicate lightweight access point
IP address.
OL-8335-02