Table of Contents
Advertisement
Technical Specifications
XM PFP
Ratio Tolerance Range (before alarm)
Maximum Flow Rate (measured with oil)
Fluid Viscosity Range
Air Inlet
Fluid Inlets
Maximum Fluid Working Pressure for
A and B Materials
Maximum Fluid Working Pressure for
Flushing Fluid
Maximum Fluid Working Pressure for
Heating Fluid
Maximum Fluid Temperature
System Inlet Supplied Air Pressure Range
Maximum Main Pump Air Pressure
Maximum Feed Pump Air Pressure
Maximum Tank Air Pressure
Air Filtration
Ambient Operating Temperature Range
Ambient Storage Temperature Range
Environmental Conditions Rating
System Weight (empty, no fluid)
Mix Ratio Range
Air Consumption
Minimum
Maximum
Typical Application
Power Requirements
Voltage (can be set with jumpers)
Wattage
Amps
3A8047B
US
3 gallons per minute
Handles mastic materials which are loaded into heated tanks with
ram-fed priming piston pumps
6000 psi
4500 psi
100 psi
160°F
80-150 psi
100 psi
65 psi
90 psi
40 micron main filter, 5 micron control air filter
32 to 130 °F
30 to 160 °F
Altitude up to 13,123 ft
2175 lb
100 scfm
250 scfm
125-175 scfm
Option 1: 200-240 VAC, 3 phase DELTA (3 wire plus ground)
Option 2: 350-415 VAC, 3 phase WYE (4 wire including neutral plus
23,400 watts (with optional non-hazardous flush water heater)
200-240 VAC, 3-phase models DELTA: 63 Amps per phase full load
350-415 VAC, 3-phase models WYE: 40 Amps per phase full load
Technical Specifications
Metric
+/- 5%
13.6 liters per minute
1 in. npt(f)
Pail (Feed Pumps)
41 MPa, 414 bar
31 MPa, 310 bar
0.7 MPa, 7 bar
0.5-1.0 MPa, 5.5-10.3 bar
0.7 MPa, 7 bar
0.45 MPa, 4.5 bar
0.6 MPa, 6 bar
0 to 54 °C
-1 to 71 °C
Altitude up to 4000 m
987 kg
1:1 to 1.5:1
2.8 meter^3/min
7.1 meter
3.5-5.0 meter
ground)
18,800 watts
70°C
3
/min
3
/min
65
Advertisement
Table of Contents
