Installing The Starter Drive; Installing The Rotor And Ignition Pulse Generator - Husqvarna FC 350 2016 Repair Manual

17 ENGINE
17.5.19
17.5.20
224

Installing the starter drive

Installing the rotor and ignition pulse generator

Guideline
Screw, water pump
cover
O.
-
Position freewheel gear
8.
-
Mount starter idler gear
-
Mount and tighten screw
Guideline
Screw starter M6
idler gear
-
Ensure that the woodruff key is seated properly. Mount the
rotor.
Info
To simplify installation, turn the starter idler gear coun­
terclockwise.
-
Mount and tighten screw
Guideline
Rotor screw M10x1
M6x25 10 Nm (7.4 lbf ft)
CD
with washer.
10 Nm (7.4 lbf ft)
Loctite
0-
70 Nm (51.6 lbf ft)
Thread, oiled with
engine oil/cone
degreased
41
®
243
™
41
41