Installing The Clutch Discs - Husqvarna FC 250 2017 Repair Manual

17 ENGINE
17.5.16
224

Installing the clutch discs

-
Position the new lock washer and mount nut (D. Tighten the
nut, holding the inner clutch hub with a special tool.
Guideline
Nut, inner M18x1 .5
clutch hub
I Holding wrench (51129003000)
-
Secure the nut with the lock washer.
-
Mount sleeves @.
-
Thoroughly oil the clutch facing discs.
I Engine oil (SAE 1 0W/50)
-
Insert the intermediate clutch disc.
Guideline
I Thickness
-
Place the clutch facing and intermediate discs into the clutch
basket.
-
Insert the intermediate clutch disc.
Guideline
I Thickness
Mount clutch throw-out
-
Mount the clutch pressure cap. Mount screws @ with the
washers and springs. Tighten the screws diagonally.
Guideline
I I
Screw, clutch spring
100 Nm (73.8 lbf ft)
Loctite
(� p. 296)
(� p. 290)
11 mm (0.04 in)
I 1 mm (0.04 in)
O.
M6 110 Nm (7.4 lbf ft)
®
243 ™