Table of Contents
Advertisement
Preparing the installation
Tools required for installation
General tools
① Vacuum pump
⑥ Spirit level
⑪ Measuring tape
Tools for operation
① Thermometer
Accessories (supplied)
Before the installation, make sure to check if following accessories are included inside the DVM Hydro unit.
Installation manual
Additional accessory (not included)
Additional accessory needs to be purchased separately and installed to operate DVM Hydro unit.
(Model name of the wire remote controller : MWR-WW00)
Wired remote controller
f Recommended specification of the strainer
Model name
Work pressure
ADN160BDEH✴
ADN320BDEH✴
ADN500BDEH✴
DVM HYDRO UNIT_IM_E_03469A(1).indd 5
② Torque wrench
③ Pipe cutter
⑦ Screw driver
⑧ Spanner
② Resistance meter
Work temperature
1.0 MPa
-5~45°C
④ Reamer
⑨ Drill
③ Electroscope
Drain plug
Water pipe
Mesh Size
connection part
PT 1 (25A)
50 Mesh
PT 1-1/4 (32A)
⑤ Pipe bender
⑩ L wrench
Drain cap
Material (Strainer/Mesh)
AISI316/SUS304
5
2012-11-21 오후 2:32:19
Advertisement
Table of Contents
