Water Pipe Installation - Samsung ADN BDEH Series Installation Manual

Water pipe installation

1. You do not need to equip extra expansion tank when there's open type expansion tank on top part of the existing
thermal storage tank. However, if you do not have expansion tank, you will need to construct closed type pipe system
and equip expansion tank.
2. Water pipe installation system
1) Install the water pipe as shown in the below illustration. All the parts, other than DVM Hydro unit, must follow on site
installation specification.
<Water pipe connection part>
Finishing tape
Water
pipe
f Installing hot water supply
Hydro unit
Heat
exchanger
on water
side
⑥
① Water pipe joint (union, flange)
② Thermometer
③ Manometer
④ Ball valve
DVM HYDRO UNIT_IM_E_03469A(1).indd 15
DVM Hydro unit
Insulator
⑨
Makeup water
On site
Ball valve
installation
(Used as
cleaning hole)
⑧ ② ③
④
①
⑫ ⑪
⑤ Flexible joint
⑥ Drain (within the product)
⑦ Pump
⑧ Air vent
Overflow pipe
Drain pipe
Top part slope ≥ 1/200
⑧
Cleaning device
⑤
⑩
⑪
⑦
⑨ Expansion tank
⑩ Temperature sensor for hot water tank
⑪ Drain valve
⑫ Strainer
Mechanical room
Water out
Hot
water
tank
Water in
15
2012-11-21 오후 2:32:20