Preparing for installation
Outdoor unit classification
Model
Installation combination
▶ You must install the indoor unit that uses R-410A only.
▶ If sum capacity of the combined indoor units exceeds the capacity of an outdoor unit, the capacity of each
indoor unit is reduced below the rated capacity. Therefore, keeping the combination of indoor units within
the capacity of an outdoor unit is recommended.
Outdoor unit
AM040*XMD*R Series
AM050*XMD*R Series
AM060*XMD*R Series
Accessories
▶ You must keep the following accessories until the installation is finished.
▶ Hand over the installation manual to the customer after finishing the installation.
Manual (2)
Tube Socket (1) for 4/5 HP only
Shape
Heat Recovery
Outdoor unit capacity (HP)
4
5
6
1phase
3phase
The maximum number of
connectable indoor units
8
9
10
Drain plug (1)
Rubber Leg (4)
AM040*XMDER
AM050*XMDER
AM060*XMDER
AM040*XMDGR
AM050*XMDGR
AM060*XMDGR
Total capacity of the
connected indoor units
(kW)
6.0~15.7
7.0~18.2
7.8~20.2
Drain cap (3)
5