Fan - HP EliteBook 840 G9 Maintenance And Service Manual

3. Remove the SIM card card blank insert (1) from the SIM card card slot.
4. Remove the connector board (2) from the computer.
Reverse this procedure to install the connector board.

Fan

To remove the fan, use this procedure and illustration.
Table 5-10 Fan description and part numbers
Description
Fan (includes cable and captive screws):
For use on computer models equipped with a 28 W processor
For use on computer models equipped with a 15 W processor
Before removing the fan, follow these steps:
1. Prepare the computer for disassembly (see
2. Remove the bottom cover (see
3. Disconnect the battery cable from the system board (see
Remove the fan assembly:
Preparation for disassembly on page
Bottom cover on page 45).
45).
Battery on page 47).
Spare part number
N09036-001
N09035-001
Fan 59