Table of Contents
Advertisement
2.
Remove the bottom cover (see
3.
Disconnect the battery cable from the system board (see
Remove the solid-state drive:
1.
Remove the solid-state drive shield.
The solid-state drive shield is included in the Bracket Kit, spare part number N09030-001.
2.
Thoroughly clean the thermal material from the surfaces of the solid-state drive shield and the solid-state
drive shield each time the solid-state drive shield is removed. Replacement thermal material is included
with the solid-state drive shield spare part kit. The following illustration shows the replacement thermal
material locations.
A thermal pad is used on the solid-state drive shield (1) and on the solid-state drive shield area (2) that
services it.
3.
Remove the Phillips M2.0 × 2.5 screw (1) that secures the drive to the computer.
Bottom cover on page
45).
Battery on page
47).
Solid-state drive
55
Hide quick links:
Advertisement
Table of Contents
