Table of Contents
Advertisement
2.
Remove the heat sink from the system board (2).
3.
Thoroughly clean the thermal material from the surfaces of the heat sink and the system board
components each time the heat sink is removed. Replacement thermal material is included with the heat
sink and system board spare part kits. The following illustration shows the replacement thermal material
locations.
Thermal paste is used on the system board processor (1) and on the heat sink area (2) that service it.
Reverse this procedure to install the heat sink.
Fingerprint reader
To remove the fingerprint reader, use this procedure and illustration.
Fingerprint reader
77
Hide quick links:
Advertisement
Table of Contents
