Rnet Source Audio Connections - Russound CAA66K Installation Manual

RNET Source Audio Connections

The CAA66 supports source control of
Russound RNET components (ST2 Smart Tuner,
SMS3 Smart Media Server) through the
Controller Link ports via SRC1 remote control
commands but provides no feedback to key-
pads.
Using quality RCA signal cables, connect the
Left and Right Audio outputs from each RNET
source to the corresponding inputs on the
CAA66 controller. Label each cable with the
name of the selected source and the Source
Audio input number located on the CAA66.
MAKING CONNECTIONS
RNET Source Audio Input Connections
RNET Link In/Out Connections
The RNET components are linked to the con-
troller and each other using RJ45 patch cables
connected to the Link In and Link Out ports.
When used with the KPL keypad, there will be no
RNET source information sent to the keypad dis-
play.
INSTALLER
21