Table of Contents
Advertisement
Front Panel Removal
The CAA66 front panel removable bottom half hides
the Programming Center. It is important to follow the
proper removal process to remove the panel without
damage.
To remove the panel, you must be able to access the
slots located underneath the front of the controller.
Place a flat screwdriv-
er blade in the bottom
slot on the left and
right between the
cover and the con-
troller. Twist the blade
to loosen the cover
from its catches.
COMPONENT GUIDE
Controller Front Panel Removal
this may require moving it until the front edge hangs
clear of the shelf.
Place a flat screwdriver blade in the bottom slot on
the left and right between the cover and the controller.
Twist the blade, then lift the bottom panel up and off.
INSTALLER
Grasp the panel on
each side and gently
lift the panel up and
off.
Panel
removed
from
controller
15
Advertisement
Table of Contents
