Install Memory - JETWAY 695AS User Manual

CyrixIII Clock Ratio
Auto Detect DIMM/PCI Clock
Spread Spectrum
** Current Host Clock is
Host Clock at Next Boot is
** Current DRAM Clock is
DRAM Clock at Next Boot is 66Mhz (HOST CLK)
↑↓→← Move Enter:Select Item +/-/PU/PD:Value F10:Save ESC:Exit
F5:Previous Values
By press PageDown/PageUp key you can change the Host clock frequency
When jumper setting
When jumper setting
When jumper setting

2-4 Install Memory

This motherboard provides
sites for memory expansion available from minimum memory size of 32MB to maximum
memory size of 1.5GB SDRAM.
Valid Memory Configurations
Bank
Bank 0, 1 (DIMM1)
Bank 2, 3 (DIMM2)
Bank 4, 5 (DIMM3)
Total
NOTE! Make sure the total installed memory does not exceeds 1.5GB, otherwise the
system may hang during startup.
Generally, installing SDRAM modules to your motherboard is very easy, you can refer to
figure 2-4 to see what a 168-Pin PC100 & PC133 SDRAM module looks like.
Default
Enabled
Disabled
66Mhz **
66Mhz
66Mhz **
F6:Optimized Defaults F7:Standard Defaults
66MHz you can choose 6699MHz
100MHz you can choose 100132MHz
133MHz you can choose 133166MHz
three 168-pin DUAL INLINE MEMORY MODULES (DIMM)
168-Pin DIMM
SDRAM 32, 64, 128, 256, 512MB
SDRAM 32, 64, 128, 256, 512MB
SDRAM 32, 64, 128, 256, 512MB
System Memory (Max. 1.5GB)
Menu Level >
CyrixIII CPU Ratio
Adjustment
12
Item Help
F1:General Help
Total Memory
X1
32MB512MB
X1
32MB512MB
X1
32MB512MB
32MB1.5GB