Related Documentation - Cisco uBR10012 Universal Broadband Router UBR10-FAN-ASSY= Installation Manual

Cisco systems cisco ubr10012 universal broadband router installation guide
Table of Contents

Advertisement

Related Documentation

Note
Related Documentation
Cisco uBR10012 Series Universal Broadband Router Quick Start Guide
http://www.cisco.com/en/US/docs/cable/cmts/ubr10012/quick/start/10kqsg_2.html
Cisco uBR10012 Universal Broadband Router Hardware Installation Guide at the following URL:
http://www.cisco.com/univercd/cc/td/doc/product/cable/ubr10k/ubr10012/hig/index.htm
Cisco uBR10012 Universal Broadband Router Software Configuration Guide at the following URL:
http://www.cisco.com/univercd/cc/td/doc/product/cable/ubr10k/ubr10012/scg/index.htm
Cisco uBR10012 Universal Broadband Router Fan Assembly Module
24
Is the PRODUCT ID LED/switch on fan assembly module illuminated (green) and a FAN-MISSING
alarm is randomly being triggered?
If you are running a Cisco IOS Release that does not support the PRODUCT ID LED/switch feature,
then ensure that the PRODUCT ID LED/switch is not pressed and is not illuminated. Upgrade to a
supported Cisco IOS Release on the chassis.
If you cannot upgrade to a supported Cisco IOS Release, then ensure that the PRODUCT ID
LED/switch is not pressed and not illuminated (green).
If you are running a Cisco IOS Release that supports this feature, but the FAN-MISSING alarm is
still being triggered, then follow the steps below to clear the alarm so that the software recognizes
the fan module:
Ensure that the PRODUCT ID LED/switch is pressed and illuminated (green).
1.
Remove the fan assembly module.
2.
Wait for 1 minute and reinsert the fan assembly module.
3.
If the alarm is still being triggered, and the software still does not recognize the fan, then the fan
may be faulty, you may have to replace the fan module.
If none of the above solves the problem, see the
Service Request" section on page
If you experience trouble with the startup, and the issue is not resolved with these procedures,
manually power off the router and contact a service representative for assistance and further
instructions, see the
"Obtaining Documentation and Submitting a Service Request" section on
page
25.
"Obtaining Documentation and Submitting a
25.
OL-5093-02

Advertisement

Table of Contents
loading

Table of Contents