Cisco uBR10012 Universal Broadband Router UBR10-FAN-ASSY= Installation Manual page 13

Unpacking and Preparing the Fan Assembly Module
Prerequisites
No prerequisites exist for this task.
Required Tools and Equipment
•
•
Steps
To unpack the fan assembly module:
Open the shipping carton by cutting the packing tape along the flaps on the top of the box.
Step 1
Lift off the top layer of packaging to expose the module.
Step 2
Remove the fan assembly module from the box.
Step 3
Retain the packaging and the carton to return the module to the factory if it is found defective. For more
Step 4
information, see the
What to do next
After performing this step, install the Fan assembly modules, see
section on page
OL-5093-02
Fan assembly module (UBR10-FAN-ASSY= or UBR10012-FAN-PLUS=)
ESD-preventive wrist strap
"Obtaining Documentation and Submitting a Service Request" section on page
14.
Preparing to Unpack the Fan Assembly Module
Cisco uBR10012 Universal Broadband Router Fan Assembly Module
"Install the Fan Assembly Module"
25.
13