Advertisement
BEFORE FIRST USE
1. Read all instructions carefully and keep them for future reference.
2. Remove all packaging.
3. Ensure that the filter is installed in the kettle.
4. Plug the Power Base into a 120V AC wall outlet.
5. Fill the Kettle with 1 liter (4 cups) of cold tap water, place on the
Power Base and press the Power Button and bring to a boil.
6. Once water has boiled, open the cover and add 500 ml (2 cups) of
white vinegar. Let stand for at least 1 hour or overnight. Discard
water and vinegar solution.
7. Fill the kettle to the MAX fill line with cold tap water. Bring to a boil
and discard. Repeat.
8. The kettle is now ready to use.
HOW TO USE
1. Open the Lid by pressing the Lid Opening Button and fill with a
minimum of 500 ml (2 cups) of water.
2. DO NOT attempt to fill the Kettle while it is plugged into the wall outlet.
DO NOT use for other than boiling water. Other liquids will
contaminate the interior of the kettle.
DO NOT fill past the MAX level indicated on the Water Level Window.
Overfilling may cause water to spit out when boiling.
3. Close the Lid.
4. Place the Kettle on the Base on a flat, level, dry, heat resistant
surface. Ensure that it is correctly engaged on the Base.
5. Plug into a 120V AC wall outlet.
NOTE: Never plug kettle into an electrical outlet when the kettle is
empty.
6. Direct kettle spout away from cabinets, walls, etc. to prevent possible
steam damage.
7. Depress the Power Button on the Lid and the white indicator light will
be visible through the Water Level Window indicating that the kettle is
in the boil cycle. Once the water has boiled, the indicator light will go
out and the Kettle will shut off. To turn off the kettle at any time, press
the Stop Button.
IMPORTANT:
a) The kettle shuts off automatically after the boiling cycle is complete.
b) If the kettle is removed from the base before the boiling cycle is
complete kettle will automatically shut off.
c) To turn the kettle off before the boiling cycle is complete, press the
Stop Button.
8. The Lid should not be opened when the Kettle is hot.
9. If you want to use the Kettle again, allow the thermal safety switch
to cool down for 15 to 20 seconds then depress Power Button.
4
Advertisement
