Description Of Parts; Before First Use - Salton GK2077 Instruction Booklet

DESCRIPTION OF PARTS

1. Spout
2. Control Panel
a. Keep Warm
b. °C/°F Button
c. Power Button
3. Handle
4. Power Base
5. Cord Wrap
6. Kettle Lid

BEFORE FIRST USE

1. Read all instructions carefully and keep them for future reference.
2. Remove all packaging.
3. Fill the Kettle with 1 L (4 cups) of cold tap water and bring to a boil.
4. Add 500 mL (2 cups) of white vinegar and let stand for at least 1 hour
or overnight. Discard.
5. Fill the kettle to the maximum fill line with cold tap water. Bring to a
boil and discard. Repeat.
6. The kettle is ready to use.
HOW TO USE
1. Open the Lid. Fill the Kettle through the lid opening with a minimum of
500 mL (2 cups) of water.
2. DO NOT attempt to fill the Kettle while it is plugged into the wall outlet.
DO NOT use for other than boiling water. Other liquids will
contaminate the interior of the kettle.
DO NOT fill past the MAX level printed on the glass. Overfilling may
cause water to spit out when boiling.
3. Close the Lid.
4. Place Kettle and Base on a flat, level, dry, heat resistant surface.
Ensure that it is correctly engaged on the Base.
4
2a 2b
2c
1
4
6
2
3
5