Table of Contents
Advertisement
19.Direct kettle spout away from cabinets, walls, etc. to prevent possible
steam damage.
20.Do not use the Kettle if liquid is below the 0.5L (MIN) or above
1.7L (MAX) marking.
21.Do not attempt to remove any housing parts or insert foreign objects
into the kettle.
SAVE THESE INSTRUCTIONS
HOUSEHOLD USE ONLY
GROUNDED PLUG
To reduce the risk of electric shock this appliance has a grounded plug
(2 blades and 1 pin). If the plug does not fit fully into the electrical outlet
contact a qualified electrician. Do not modify the plug in any way or use
an adaptor.
BEFORE FIRST USE
1. Read all instructions carefully and keep them for future reference.
2. Remove all packaging.
3. Gently wash the Tea Infuser Assembly in warm soapy water and allow
to dry.
4. Fill the Kettle with 1 L (4 cups) of cold tap water and bring to a boil.
5. Add 500 mL (2 cups) of white vinegar and let stand for at least 1 hour
or overnight. Discard.
6. Fill the kettle to the maximum fill line with cold tap water. Bring to a
boil and discard. Repeat.
7. The kettle is ready to use.
HOW TO USE
1. Open the Lid by lifting it straight up. Fill the Kettle through the lid
opening with a minimum of 500 mL (2 cups) of water.
2. DO NOT attempt to fill the Kettle while it is plugged into the wall outlet.
DO NOT use for other than boiling water. Other liquids will
contaminate the interior of the kettle.
DO NOT fill past the MAX level printed on the glass. Overfilling may
cause water to spit out when boiling.
3. Place the Lid back on the Kettle.
4. Place Kettle and Base on a flat, level, dry, heat resistant surface.
Ensure that it is correctly engaged on the Base.The kettle will beep
twice and the power indicator light will illuminate green.
3
Advertisement
Table of Contents
