Advertisement
GROUNDED PLUG
To reduce the risk of electric shock this appliance has a grounded plug
(2 blades and 1 pin). If the plug does not fit fully into the electrical outlet
contact a qualified electrician. Do not modify the plug in any way or use an
adaptor.
BEFORE FIRST USE
1. Read all instructions carefully and keep them for future reference.
2. Remove all packaging.
3. Water boiled for the first time should be discarded.
INSTRUCTION FOR USE
1. Open lid and fill the kettle through the lid opening, with a minimum of
0.5 litres of water. (MIN level)
NOTE:
DO NOT attempt to fill while the kettle is on the power base.
DO NOT use for other than boiling water. Other liquids will contaminate
the interior of the kettle.
DO NOT fill past the MAX level indicated on the water level window of
the kettle. Overfilling may cause water to spill out when boiling.
2. Place kettle on power base making sure it is engaged properly.
3. Plug power base cord into a 120V AC wall outlet. The unit will beep, the
display screen will flash 'C' twice and then display the current water
temperature in Celsius.
NOTE: If the power base cord is plugged into the wall outlet without the
kettle placed on its base, or at any time the kettle is lifted off the base,
the display screen will display 'E' until the kettle is engaged back on the
power base.
NOTE: Never plug power base with empty Kettle into the electrical outlet.
3
Advertisement
