Table of Contents
Advertisement
Set the settings for the heartbeat-related options.
HR Measure
MHR Measure
Heartbeat
Resting HR
MHR
HR Monitor
Power saving mode of the watch. The watch will automatically
power off if it is idle for more than 24 hours.
Watch PSM
Auto Backlight
Pedometer
Compass
Compass Calibration:
CAL
Follow the instructions on the watch to calibrate the compass.
Watch face
Set the face of your watch in watch mode.
Select the heart rate detection method, the built-in
optical heart rate sensor (PPG) or an additional pair
of heart rate measurement bands.
1. Please follow the instructions given by the watch
to perform the test. Each lap is 400 meters, 8 laps in
total.
2.The measurement of heart rate may be inaccurate
depending
on
the
subcutaneous tissue or the way you wear your
watch...etc. The measurement results are for
reference only.
1. Please follow the instructions given by the watch
to perform the test.
2.The measurement of heart rate may be inaccurate
depending
on
the
subcutaneous tissue or the way you wear your
watch...etc. The measurement results are for
reference only.
1. Set your maximum heart rate. Choose "Auto" or
"User definition" as the setting method.
2. "Auto" is calculated by 220-age.
The watch will automatically measure your heartbeat
every 5 minutes when you turn on this function, and
can monitor the change of heartbeat within 4 hours.
Turn on or off the automatic backlight function in
watch mode.
Turn on or off the pedometer function in watch mode.
color
of
your
skin
color
of
your
skin
and
and
Page 55
Advertisement
Table of Contents
