Crest Audio CR5058 User Manual page 20

Scuba Mode – Underwater
When reaching the depth indicated for
Decompression/Safety Stop
or Decompression Stop but no Stops are
performed
Scuba Mode – Underwater
When exceeding the NDL,
and Decompression or Safety Stop
at CEILING depth has ended.
Scuba Mode – Return to the Surface
Scuba Mode – Underwater
When reaching the depth indicated for
Decompression/Safety Stop
or Decompression Stop but no Stops are
Description:
OVER：After reaching the depth indicated for
Safety Stop/Decompression Stop but divers do
not perform Stops, it will blink and there
an alarm warning (short beeping repeated) with
vibration.
Please remain at the ceiling depth the entire
duration indicated by the countdown timer if
you have enough air and no other potential risks
are evident.
Scuba Mode – Underwater
When exceeding the NDL,
and Decompression or Safety Stop
at CEILING depth has ended.
Description:
CLEAR: When divers finish all decompression and
safety stops at ceiling depth, it will show CLEAR
and indicate divers can now slowly ascend to the
surface.
PO2: when accumulated
exceeds your PO2 setting, it will show the
current accumulated PO2 value.
If accumulated PO2 calculation does not exceed
your PO2 setting, it will show current time.
Scuba Mode – Return to the Surface
When you return to the surface, the dive will be
automatically ended according to the Log Stop time
setting, you cannot use any button to stop or exit
before the recording is completed.
performed
PO2 calculation
will be
Page 20