Crest Audio CR5058 User Manual page 24

Scuba Depth Alarm
After entering this setting, press the up/down button
to select on after the blinking, then press the mode
button to confirm the setting value and stop blinking
to set the depth; if you select off, the depth cannot be
set.
After the depth blinks, press the up/down button to
set value, then press the mode button to confirm the
set value and stop blinking to complete the setting.
Scuba Depth Alarm
Scuba Time Alarm
After entering this setting, press the up/down button
to select on after the blinking, then press the mode
button to confirm the setting value and stop blinking
to set the time; if you select off, the depth cannot be
set.
After the time blinks, press the up/down button to set
value, then press the mode button to confirm the set
value and stop blinking to complete the setting.
Scuba Time Alarm
Sampling
Set the dive log sampling frequency.
Default: 10 seconds
Please note:
This setting will be automatically synchronized to the
Gauge Mode.
Sampling
Log stop
Set the dive log end time.
Default: 1 minute
Log stop
Page 24