Crest Audio CR5058 User Manual page 36

Navigate Mode - Start Surface
Navigation
Navigate Mode - Start Surface
Navigation
Forward to the dive spot.
Navigate Mode - Start Surface
Navigation
Reach the dive spot.
Navigate Mode - Start Surface Navigation
Press the Mode button, select "GO" to start
navigation.
Icons：
Arrow：Diver's direction (the forward direction), the
number below the arrow is the bearing
Green dot：indicates the direction of selected dive
spot, which is also the right direction of your
destination
Green character (middle): the name of the spot
White number (below): distance to the spot
Description：
1. To turn till facing the green spot to align
direction of movement with your goals).
2. When aligned,
become one green arrow
movement is the direction of the dive spot), then you
can go to the spot in this direction.
3. When you are heading in the right direction, you
will get gradually closer to the dive spot. Please keep
going.
4. When reaches the dive spot area,
vibrate twice with two short beeps. Meanwhile,
the green dot turns into a white dot, the outer
green circle becomes bolded.
5. You can switch to dive mode and prepare to start a
dive.
Please note:
The GPS signal can only be received on the surface
of the water, so please do not use it in the water to
ensure that the navigation function works well.
white arrow and green spot will
(the direction of forward
the watch will
(align your
Page 36