Crest Audio CR5058 User Manual page 18

Scuba Mode – Safety stop finished
(When the NDL has not been exceeded)
Description：
CLEAR: When divers finish Safety Stop at the
CEILING depth, the dive computer will show the
word CLEAR indicating that it is OK to perform a
slow ascent to the surface.
When the safety stop is completed, the watch
will vibrate twice, long buzz and the CLEAR will
flicker twice.
Ascent speed (03 means 3 m/min).
：
Descent speed（03 means 3 m/min）
：
Scuba Mode – Safety stop finished
(When the NDL has not been exceeded)
NO arrow icon: Diver is stationary.
09:25：Current time.
TIME：Dive time.
TEMP：Water temperature.
Scuba Mode – Underwater
When the NDL has been exceeded
(first three minutes)
Description：
NDL：The Non-Decompression Limit time in
minutes, will show 99 when NDL exceeds 99
minutes.
If it reaches 4 minutes remaining, there will be
an alarm warning (short beeping repeated) with
vibration. Divers should ascend slowly and end
your dive.
When exceeds NDL time, the first 3 minutes will
Scuba Mode – Underwater
be shown in:
When the NDL has been exceeded
(first three minutes) - minutes: seconds
CEILING: The depth at which divers should ascend
to and remain when they are required to perform
decompression stops.
Page 18