Cisco 7304 Quick Start Manual page 8

About the GBIC and SFP Module
The Gigabit Interface Converter (GBIC) and small form-factor pluggable (SFP) module support online insertion and removal
(OIR). For more information on the GBIC or SFP type, technologies, and models, see the Cisco 7304 Installation and
Configuration Guide.
Figure 2 Installing a Gigabit Interface Converter in the NSE-100
4
1
GBIC module
2 Alignment groove
Turn the Gigabit Interface Convertor (GBIC) (1) so the label side is up and the alignment groove (2) is down.
Step 1
The GBIC is keyed so that it cannot be inserted incorrectly.
Note
Step 2 Insert the GBIC into GBIC slot 0 or 1 (3). Repeat Step 2 if you are inserting a second GBIC.
Do not remove the GBIC plug until you are ready to install the cables.
Note
8
R E S E T
2
S E C O N
E N G IN E
1
3
C O M PA
C T F L A
S H
G E 0
D A R Y
G E 1
1 0 0
R X
T X
L IN K
R X
L IN K
3
GBIC slot
4 Plug
C O N S O
L E
T X