Cisco 7304 Quick Start Manual page 27

Figure 0-20 Identifying LEDs and LED Status on the NSE-150 LEDs
CLASS 1 LASER PRODUCT / LASERPRODUKT DE KLASS 1 / PRDUIT LASER DE CLASE 1 / PRODUCTO LASER CLASE 1 /
GIGABIT ETHERNET 0 GIGABIT ETHERNET 1
LINK LINK
ACTIVE STANDBY
SYSTEM-UP
RESET
NETWORK SERVICE ENGINE 150
SFP SFP
LED Label
ACTIVE
SYSTEM-UP
STANDBY
GIGABIT
ETHERNET 0 LINK
GIGABIT
ETHERNET 1 LINK
GIGABIT
ETHERNET 2 LINK
GIGABIT
ETHERNET 3 LINK
DISK 0
FE Management
Port LINK
1
GIGABIT ETHERNET 2 GIGABIT ETHERNET 3
LINK LINK
SFP SFP
Color State
Green On
Off
Green/Yellow Green
Yellow
Off
Green On
Off
Green/Yellow Green
Yellow
Off
Green/Yellow Green
Yellow
Off
Green/Yellow Green
Yellow
Off
Green/Yellow Green
Yellow
Off
Green/Yellow Green
Yellow
Off
Green/Yellow Green
COMPACT FLASH
DISK 0 LINK
FE 0
FOR MANAGEMENT USE ONLY
Function
NSE is up and running.
NSE is off. Default state on power up.
Cisco IOS is up and running.
ROMmon is booting up, ROMmon detects a fatal hardware error, or
ROMmon is hanging before the system completes the bootup process.
ROMmon has completed the bootup process and the system either is in
the autoboot stage or is waiting for a user command at a rommon#>
prompt, or the NSE is off.
The NSE is the standby NSE in a High Availability configuration.
The NSE is not running or is running as the primary NSE.
Gigabit Ethernet port 0 is up.
Gigabit Ethernet port 0 line protocol is down due to a link error or other
conditions.
Default state on power up, Gigabit Ethernet port 0 has been
administratively shut down, or a fatal hardware error has occurred.
Gigabit Ethernet port 1 is up.
Gigabit Ethernet port 1 line protocol is down due to a link error or other
conditions.
Default state on power up, Gigabit Ethernet port 1 has been
administratively shut down, or a fatal hardware error has occurred.
Gigabit Ethernet port 2 is up.
Gigabit Ethernet port 2 line protocol is down due to a link error or other
conditions.
Default state on power up, Gigabit Ethernet port 2 has been
administratively shut down, or a fatal hardware error has occurred.
Gigabit Ethernet port 3 is up.
Gigabit Ethernet port 3 line protocol is down due to a link error or other
conditions.
Default state on power up, Gigabit Ethernet port 3 has been
administratively shut down, or a fatal hardware error has occurred.
CompactFlash Disk is being accessed.
CompactFlash Disk access failure.
Default state on power up.
Fast Ethernet physical link is up, line protocol is up.
CAUTION: THIS ASSEMBLY
CONTAINS
ELECTRO-STATIC
SENSITIVE DEVICES
0 1
7300-NSE-150
USB CONSOLE AUX
27