Install The External Options - Cisco 7304 Quick Start Manual

3

Install the External Options

This section provides installation instructions for the CompactFlash Disk and the GBIC and SFP module.
Install the CompactFlash Disk
Figure 1 Inserting and Removing the CompactFlash Disk
1
1 Insert the CompactFlash Disk
2 Depress the ejector button
Insert the CompactFlash Disk into the CompactFlash Disk slot with the label with the vendor name and memory size facing up.
The CompactFlash Disk protrudes when completely inserted.
To eject a CompactFlash Disk, press the ejector button—located on the right side of the slot—until the CompactFlash Disk is
free of the connector at the rear of the PC Card slot. Remove the CompactFlash Disk from the slot and place it in an antistatic
bag.
About the CompactFlash Disk
The CompactFlash Disk supports online insertion and removal (OIR). For more information on CompactFlash Disks, see
Appendix C of the Cisco 7304 Installation and Configuration Guide at
http://www.cisco.com/univercd/cc/td/doc/product/core/cis7300/install/13279fd.htm
Install the GBIC or SFP Module
Because invisible laser radiation may be emitted from the aperture of the port when no fiber cable is connected,
Warning
avoid exposure to laser radiation and do not stare into open apertures.
Class 1 laser product.
Warning
Warning Class 1 LED product.
2
3
3
Remove the CompactFlash Disk
I
7