Cisco 7304 Quick Start Manual page 25

Figure 18 Identifying LEDs and LED Status on the NSE-100
7300-NSE-100
DISK 0
RESET
PRIMARY SECONDARY
SYSTEM-UP
NETWORK SERVICES ENGINE 100
2
3
4
LED Label Color
DISK 0 Green/Yellow
GE0 LINK Green/Yellow
GE1 LINK Green/Yellow
FE0 LINK Green/Yellow
PRIMARY Green
SECONDARY Green
SYSTEM-UP Green/Yellow
COMPACT FLASH
GE 0
RX TX
LINK
5
State Function
Green CompactFlash Disk is being accessed.
Yellow CompactFlash Disk access failure.
Off Default state on power up.
Green Gigabit Ethernet port 0 is up.
Yellow Gigabit Ethernet port 0 line protocol is down due to a link error or
other conditions.
Off Default state on power up, Gigabit Ethernet port 0 has been
administratively shut down, or a fatal hardware error has occurred.
Green Gigabit Ethernet port 1 is up.
Yellow Gigabit Ethernet port 1 line protocol is down due to a link error or
other conditions.
Off Default state on power up, Gigabit Ethernet port 1 has been
administratively shut down, or a fatal hardware error has occurred.
On Fast Ethernet physical link is up.
Yellow Line protocol is down due to a link error.
Off Default state on power up or has been administratively shut down.
On NSE is up and running.
Off Default state on power up.
Green The NSE is the standby NSE.
Off —
Green Cisco IOS is up and running.
Yellow ROMmon is booting up, ROMmon detects a fatal hardware error, or
ROMmon is hanging before the system completes the boot up
process.
Off The NSE is off, or ROMmon has completed the boot up process and
the system either is in the autoboot stage or is waiting for a user
command at a rommon #> prompt.
CONSOLE
FE MANAGEMENT
GE 1
RX TX
LINK
6
AUX
PORT
LINK
7
25