Table of Contents
Advertisement
Run the Installation Wizard
During the Secure Access installation, the installation wizard enables you to select the features you
want to install per server machine. If you are distributing the components across multiple server
machines, you must run the wizard on each server machine, selecting only the required components.
If you are installing on a single server machine, you only need to run the wizard once.
Each deployment requires at least one CAS, DCE, DRE, and Secure Access Manager.
1. Ensure that the steps in "Preparing the Network and Database," are completed before running the
installation.
2. Close all other applications on the server machine prior to running the Secure Access installation.
3. Launch the Secure Access installation wizard.
• If you are installing from the Secure Access CD, select the 32-bit Setup.exe to begin the install
for a 32-bit machine, or select the 64-bit Setup.exe to begin the install for a 64-bit machine.
OR
• If you are installing from an electronic distribution, download the ZIP file and run the 32-bit or
64 -bit server Setup.exe file.
Note:
If you attempt to run the setup.exe file and receive an error message, you may need to
update the version of the Microsoft Installer. Visit the Microsoft website and download and install
the latest Microsoft installer for your operating system.
4. At the Welcome screen, click Next to begin the installation process.
5. Review the Software License agreement, and click I accept, then click Next.
6. Choose the options you want to install on this machine, then click Next.
By default, all components are selected. Select only those components that you need on this
particular server machine. For example, if this machine is your Print Server, install only the DRE and
DCE components. Run the Installer on another server machine to install the remainder of the
components as needed.
Note:
Read the component descriptions provided in
you install any component. This information will help you determine how to best deploy the
components to suit the needs of your organization.
7. Choose the interface language you want in the Select Language screen. This is the language that
will be used in the Secure Access Manager only. The language used in all MFP front panel prompts
is controlled by the MFP settings.
8. In the Instance for SQL Express screen, enter the database instance name that you created for
the SQL Express database. Click Next.
Note:
The instance name you enter in this field MUST match the instance name you created for
the Secure Access database when you installed SQL Express. The installation cannot proceed
without the correct instance name. If you performed a standard SQL Express install and did not
change any parameters from the default, leave this setting as SQLEXPRESS, then click Next.
Installing the Secure Access Server
Secure Access Components
Xerox Secure Access Installation Guide
on page 14 before
23
Advertisement
Table of Contents
