HP Agilent 8757D Operating Manual page 9

General Safety onsiderations
Warning
No operator serviceable parts inside. Refer servicing to qualified personel. To
prevent electric shock, do not remove covers.
Warning
To prevent electrical shock, disconnect the Agilent Technologies 8757D from
mains before cleaning. Use a dry cloth or one slightly dampened with water to
clean the external case parts. Do not attempt to clean internally.
Warning
If this product is not used as specified, the protection provided by the
equipment could be impaired. This product must be used in a normal condition
(in which all means for protection are intact) only.
Always use the three-prong AC power cord supplied with this product. Failure
Caution
to ensure adequate earth grounding by not using this cord may cause product
damage.
Safety Symbols
General
his product was designed and manufactured in accordance with international safety
standards. Before you operate this analyzer, review the product and related documentation.
Become familiar with safety markings and instructions.
Instruction manual symbol: the product will be marked with this symbol
when it is necessary for the user to refer to the instruction manual (refer to
M
able of Contents).
K
Indicates hazardous voltages.
Indicates earth (ground) terminal.
he CE mark is the registered trademark of the European Community.
he CSA mark is a registered trademark of the Canadian Standards
Association.
ISM1-A
his is a symbol of an Industrial Scienti c and Medical Group 1, Class A
product (CISPR 11, Clause4).
he \ON" symbol is used to mark the position of the analyzer's line power
switch.
he \S ANDBY" symbol is used to mark the position of the analyzer's power
switch.
1-2 General Information