HP Agilent 8757D Operating Manual page 20

: All analyzer channels can display any detector input, or any ratio combination of
Display Modes
detector inputs. The CRT/LCD can display data in one of the following modes.
Log Magnitude:
dBm:
dB:
SWR:
AUX:
Display
Mode
dBm
dB (ratio)
Normalized Ratio
SWR
AUX
: Up to 8 operator-selected colors for CRT/LCD attributes (such as the grid,
Color ettings
measurement traces, and labels).
1
The values in this table are
Maximum 90 dB range pen trace.
3
0.01 dB for display cursor.
4
Maximum 180 dB range pen trace.
Table 1-3. Operating Characteristics 1 (1 of 4)
Display
Single channel power measurement.
Relative power measurement (ratio or relative to trace memory).
Relative measurements.
The rear-panel BNC input ADC IN can be measured and displayed in volts
( 0 10 to +10V). Typical maximum error is 60 mV.
cale
Resolution
0.1 to 20 dB/div
0.1 to 20 dB/div
0.1 to 20 dB/div
0.02 to 10 units/div
0.025 to 5V/div
ot
speci cations, but typical, non-warranted performance parameters.
Display
Range
0 80 to 0 130 dBm
2
0 150 to +150 dBm
4
0 180 to +180 dB
1.0 to 37.0
0 10 to +10V
Vertical
Resolution
0.003 dB
3
0.006 dB
3
0.01 dB
0.01 at 1
0.1 at 10
0.27 at 30
0.001 V
General Information 1-13