Table of Contents
Advertisement
Horizontal Resolution
: 2, 4, 8, 16, 32, 64, 128, or 256 successive traces.
Averaging
: Provides a linear moving average of adjacent data points. The smoothing aperture de nes
moothing
the trace width (number of data points) averaged, and ranges from 0.1% to 20% of the trace width.
: Traces are stored and normalized with the highest resolution, independent of display
Normalization
scale/division or o set.
Calibration data is interpolated when you decrease the frequency span with adaptive normalization
engaged.
: Any limit combination of
at or sloped lines, or single points (up to 12 segments) can be
Limit Lines
displayed on channels 1 and 2. You can store limit lines in save/recall registers 1 through 4.
:
Graticules
1
The values in this table are
1-14 General Information
Table 1-3. Operating Characteristics 1 (2 of 4)
Display
:
Number of Traces
1
2
3, 4
8 vertical x 10 horizontal divisions.
1 division 11 mm.
ot
speci cations, but typical, non-warranted performance parameters.
(cont'd)
Number of Points
101, 201, 401, 801, 1601
101, 201, 401, 801
101, 201, 401
Advertisement
Table of Contents
